Step 02TQT does thisWith Material · Before Coupons
The machine is in tolerance.
Calibration
Welding machines, wire feeders & gauges · At your shop
When your welding machine says 150 amps, calibration proves it's really delivering 150 amps. We check it against reference meters, right at your shop. Before the first arc, and again on interval.
The oven. If the dial says 350°, it has to be 350°. Otherwise the recipe is a guess.
Why it matters
Your paperwork is only as true as your meter
Your PQR records amps and volts. Your WPS sets ranges for them. If the machine's display is off, every number on that paperwork is off too.
12% low, and nobody knew.
That weld was run colder than the WPS says. Calibration catches it, and the machine gets adjusted or tagged out.
Field calibration
We come to you
We check your machines where they sit, so nothing has to be moved.
Field
At your shop.
We bring reference meters and check your machines where they sit. Mileage is charged at 72.5¢ a mile to and from your site.
Book a field visit →What we check
Machines, wire feeders and gauges
Every reading that ends up on a PQR or WPS.
Welding power sources
Amperage and voltage displays against reference meters.
Wire feeders
Wire feed speed, checked against the set point.
Gauges
Gas flowmeters and pressure gauges.
How it works
From check to sticker
You get the readings, not just a pass.
-
Book it
Pick a day for a field visit.
YOU -
We measure
Each reading against a reference meter.
TQT -
You get the record
As-found and as-left readings, on a certificate.
TQT -
Sticker & due date
Tagged with when it's due again.
TQT
Keep it good
Before the first arc, and again on interval
Before you weld coupons
Calibrate before the coupon for your PQR, so the numbers on it are real. Coupons →
Again on schedule
Most shops recalibrate yearly, or as their quality program or customer requires.
Price
What calibration costs
- Covers
- One welding machine, checked against reference meters.
- Where
- At your shop.
- Mileage
- 72.5¢ a mile, to and from your site.
- You get
- A certificate with as-found and as-left readings, plus a due-date sticker. We also log it in our database.
Questions
Before you book
How often should we calibrate?
Most shops do it yearly. Your quality program, code or customer may set a shorter interval.
What if a machine is out of tolerance?
We record the as-found reading, adjust it if it can be adjusted, and record the as-left reading. If it can't be brought in, we tag it out.
Can you do our whole shop in one visit?
Typically, yes. Very large jobs can take two days. Tell us how many machines you have and we'll plan the visit.
Machines due for a check?
Tell us how many machines and where. We'll come to you.