The path to a good weld

What each step means

You don't buy a WPQ in a vacuum. The card sits on a qualified procedure. Think of it like a kitchen: nine steps, from checking the groceries to serving the plate.

PQRis the ingredients WPSis the recipe WPQis the chef

Proven ingredients make a trusted recipe. A trusted recipe still needs a qualified chef.

01
CREATETQT does thisOn the path

Material

The metal is what the spec says.

The groceries

Check the label matches what's in the bag before anything gets cooked.

  • TensilePull test: how much load before it breaks
  • CharpyImpact test: toughness, often at low temperature
  • PMIPositive Material Identification: confirms the alloy
  • HardnessResistance to indentation

First. You don't weld until the metal is the metal.

02
CREATETQT does thisOn the path

Calibration

The machine is in tolerance.

The oven

If the dial says 350°, it has to be 350°. Otherwise the recipe is a guess.

  • FieldOn site, at your shop

Sits with material: before the first arc, and again on interval. Done at your shop.

$175 per welding machine · plus mileage at 72.5¢/mile

03
CREATETQT does thisOn the path

Coupons

The sample joint.

The test batch

Cook it once, on purpose, so you can cut it open and see what happened.

  • PlateFlat test joint
  • PipeRound test joint

The weld you test so the procedure can be proven.

School discount available

04
CREATETQT does thisOn the path

PQR

Procedure Qualification Record

What was actually run, and what it tested.

The ingredients

Exactly what went into the test batch, and how it came out when tested.

Sits after the coupon. TQT writes the record from the coupon. The procedure is qualified here.

Typically 5–7 days · Expedite Service 3–5 days or Rush Service 1–2 days available

05
CREATETQT does thisOn the path

WPS

Welding Procedure Specification

The written procedure the shop runs.

The recipe

The written steps the kitchen follows every time, built on proven ingredients.

Sits on the PQR. Qualified by an accepted PQR.

$295 per WPS · typically 5–7 days

06
CREATETQT does thisOn the path

WPQ/WOPQ

Welder & Welding Operator Performance Qualification

The card that says this welder can run it.

The chef

Proof this cook can make the recipe. A great recipe still needs a qualified hand.

  • PlateFlat test joint
  • PipeRound test joint
  • OrbitalMachine-driven tube and pipe welding. Qualified with a WOPQ

Sits on the WPS. Orbital operators qualify with a WOPQ. Fail NDT and you come back here.

From $150 per welder test · $250 orbital operator · school discount

07
KEEPYour shop does thisOn the path

Production

Your shop. Not a TQT service.

Dinner service

The chef cooks the recipe for real, in your kitchen.

The qualified welder runs the qualified procedure.

After WPQ/WOPQBefore NDT
08
KEEPTQT does thisOn the path

NDT

Nondestructive Testing

Proof the weld is good.

The taste test

Check the plate before it leaves the kitchen, without taking a bite out of it.

  • VTVisual testing
  • PTLiquid penetrant: red dye shows surface cracks
  • MTMagnetic particle: iron powder gathers at cracks
  • UTUltrasonic: sound finds flaws inside the weld
  • RTRadiographic (X-ray). Sent out to a partner lab

After production. Pass: you're done. Fail: back to WPQ to requalify.

Full day onsite + mileage · by the hour in our lab

09
KEEPThe goalOn the path

Good weld

The destination. Released.

Served

It left the kitchen and it's right. Released.

Then stay good: recalibrate and re-verify on interval.

After NDT

The loops

The path isn't a straight line

Two things send you back.

Fail

NDT → back to WPQ

Retrain, requalify, re-inspect.

The plate gets sent back. The chef proves the dish again before it goes out.

Stay good

Good weld → back to Calibration & Material

Recalibrate, re-verify on interval.

Check the oven and restock the pantry on schedule, so tomorrow's dinner is as good as today's.

Not sure which step you're on?

Call us. We'll tell you where you are on the path and what's next.

The paper trail →