Step 06TQT does thisAfter WPS · Before production

The card that says this welder can run it.

WPQ/WOPQ

Welder & Welding Operator Performance Qualification

The WPQ is proof a specific welder can follow your WPS and make a sound weld. It's their card: the process, positions, metals and sizes they're qualified to weld. Orbital operators qualify with a WOPQ.

From $150per welder test · plate, pipe or orbital
FACE BEND · PASSED Orbital pipe weld face bend specimen folded in half
Folded flat, no cracks. A face bend strip from an orbital pipe test. The weld face is on the outside of the bend, where any flaw would open up.
In the kitchen

The chef. Proof this cook can make the recipe. A great recipe still needs a qualified hand.

Plate · Pipe · Orbital

Which test does your welder need?

Test on what your welder will weld in production. Not sure? Call and we'll match the test to the job.

Plate

The common start.

Flat test joint. Qualifies plate, and larger-diameter pipe, in the positions tested.

From $150 →

Pipe

For pipe work.

Round test joint. A fixed-position pipe test covers the most positions in one go.

From $200 →

Orbital

For orbital welding.

Qualifies the operator who sets up and runs the orbital welder on tube or pipe. This is a WOPQ.

$250 · Operator qualification (WOPQ) →

Test vs card

One test covers more than it welded

The left column is what the welder actually ran on test day. The right is what their card qualifies them to weld. Values from our sample WPQ:

TEST · WHAT THEY RAN
CARD · WHAT THEY CAN WELD
Base metal
P-1 to P-1One carbon steel
→
P-1 to P-15F, P-34, P-41 to P-49A wide family of metals
Product form
PlateFlat coupon
→
Plate; pipe 2-7/8" OD and overPlate and larger pipe
Backing
GTAW without · SMAW withAs tested
→
GTAW with or without · SMAW withOpen root covers backed
Filler F-No.
F-6 / F-4The rods used
→
F-6 · F-1 to F-4 with backingRelated filler groups

What's on a WPQ

Read a welder's card in two minutes

The top names the welder and the WPS they followed. The middle is the heart of it: actual values beside the range qualified.

Sample WPQ · TQT Lab QW-484 form, filled with example data for fictional welder Joe Welder of Example Fab Co. For illustration only.
  1. 01

    Welder & ID

    Who tested, and the ID or stamp that marks their welds.

  2. 02

    WPS followed

    The procedure they welded to. The card is tied to a real WPS.

  3. 03

    Test coupon

    Base metal, thickness, plate or pipe, and the date welded.

  4. 04

    Actual values vs range qualifiedQW-350

    Each variable twice: what they ran, then what that qualifies them for.

  5. 05

    Positions

    The test position, and the positions it covers in production.

  6. 06

    Test results

    Visual inspection, then bend tests or X-ray (RT) of the coupon.

  7. 07

    Certification

    Who witnessed and tested it, and the employer's sign-off.

Welding operators · Orbital

WOPQ: qualifying the orbital operator

On orbital and other automatic welding, the machine guides the torch. The person setting up and running it qualifies as a welding operator, with a WOPQ (Welding Operator Performance Qualification). Same step on the path, same QW-484 form, different things being proven.

Welder · WPQOperator · WOPQ
Who it's forThe person holding and guiding the torch by handThe person setting up and running an orbital or other automatic welder
What they controlHand skill: torch angle, travel speed, adding fillerThe machine: weld program, fixturing and fit-up, watching and adjusting the arc
Typical workPlate, pipe and structural weldingTube and pipe for high-purity, sanitary, pharmaceutical and process lines
How it's testedA coupon welded by hand, then visual and bend tests or RTA coupon welded on the machine, then visual and bend tests or RT
ASME rulesWelder variables (QW-350)Welding operator variables (QW-360)
FormQW-484 for both: "Welder or Welding Operator Qualification"
Sample WOPQ · TQT Lab QW-484 form, filled with example data for fictional operator Jane Operator of Example Fab Co. For illustration only.

$250 per orbital operator test (WOPQ)

What's on an orbital operator's card

  • Type: Automatic (Orbital)Marks it as an operator test, not a hand-welding test.
  • WPS followedThe orbital procedure and weld program the operator ran.
  • Tube size and wallFor example .500" OD × .065" wall 316L, and the range it qualifies.
  • Position and backing gasOrbital welds go all the way around, usually with argon purge inside.
  • Bend resultsRoot and face bends cut from the tube weld.

How it works

From test booth to card

Your welder welds. We inspect, test and issue the card.

  1. Pick the WPS & test

    Plate, pipe or orbital, in the right position. WPS →

    TQT
  2. Welder runs the test

    At our lab, or onsite at your shop with a CWI witness.

    YOUR WELDER
  3. We inspect & test

    Visual, then bend tests or RT.

    TQT
  4. Card issued

    The WPQ, ready to sign and keep on file.

    TQT

Keep it good

A card has to stay current

6 MONTHS

Keep welding with the process

Under ASME IX, a welder's or operator's qualification lapses after six months without using that process. Log it.

↺ FAIL NDT

Come back here

If production welds fail NDT, the welder retrains, requalifies and gets re-inspected.

Price

What a welder test costs

PER WELDER TEST From $150

Plate, pipe or orbital. Priced by metal and joint.

Book a welder test See all rates →
MetalPlatePipe
Carbon or aluminum$150$200
Stainless$200$250
Nickel alloys groove$250$300
Orbital operator WOPQ$250

Typically 5–7 days. Expedite (3–5 days) +$50 · Rush (1–2 days) +$200.
Net 30 terms. 4% fee on card payments.

Turnaround

How fast you get your card

Typical turnaround is 5–7 days. Need it sooner? Add expedite or rush.

STANDARD5–7 daysIncludedOur typical turnaround.
EXPEDITE3–5 days+$50Moves your job up the line.
RUSH1–2 days+$200For when the job can't wait.

Ask for expedite or rush when you book or call.

Questions

Before you book

What paperwork comes with the coupons?

The Welder Qualification Form, filled out clearly. We use it to make the certification, so check the welder's name and details. Changes after the paperwork is processed have a $50 reprocessing fee. Tag each coupon with your company, welder ID, process, position and material.

Do I need a WPS before the welder tests?

Yes. The welder tests to a WPS, and the card names it. No WPS yet? Start here.

What happens if my welder fails?

They can retest. A retest is a new submission at the standard cost of the test.

Does the card follow the welder to a new job?

No. The employer who paid for the test keeps the qualification, so a new employer usually requalifies the welder. Schools are the exception: with the student's signed authorization, we confirm and release their certifications to a prospective employer. Use the Certificate Release Form (PDF).

How long until we have the card?

Typically 5–7 days after the test. Expedite (3–5 days, +$50) and rush (1–2 days, +$200) are available.

Got a welder to qualify?

Tell us the WPS and the job. We'll set up the right test.